Відео

Too bad it was recalled... Either way this may be handy for other versions! Thank you!

My swing and bassinet are moving until about 15 plus pounds are put in and then it flashes and stops...has anyone else had this issue?

s

The gears work well Mine might just be a computer chip problem. Is there a factory reset?

Mine makes a knock noise every time it meets in the middle. I think because my toddler got on it. That’s when it started.

Thankyou so much.. I repaired myself and it's working properly now thankyou 🎉🎉

Wher i get ring?

What size O ring did you get from the hardware store?

I wonder how long this fix lasted?

If I hold the seat lever release half way, the unit works great and won't stop. But if I take it all the way up or down lock, the unit stops moving.

How on earth did you get the white base back on? I tried for hours and hours trying to put back those long screws into the white base that moves, and could not get it to attach.

Teşekkür ederim 🇹🇷

left out an important step.??

Thanks l just got finish fixing for my baby 😍 it’s now working perfectly 😊

Mines making a poppong noise as it swings when hes in it. Not so kuch when its empty and running but if theres weight in it it POPs at the same point every rotation

What size o ring did you use?

Way to speed up this video and skip parts great job

What size O ring did you use?

Como puedo arreglar el mio si no hace la función de subir y bajar , solo se mueve de un lado a otro todos los movimientos en la misma dirección?

My swing was doing the same exact thing I took the whole thing apart, and nothing was wrong with the rubber band piece. I ended up throwing the whole thing away because when I took it apart, I couldn’t get it back together.

We got one gifted to us that had been through three other kiddos before we had it. After a move we noticed that slipping noise and the obstruction warning. Followed this video and that was exactly what was wrong - belt had stretched out. Put an O-Ring on and works better than when we received it! Thank you so much!

Wow you are so smart! Thank you for this video !

I had same exact issue! I ended up just upgrading to the newest one

Hi please help!! What size screwdriver did you use

bhtiuhinoef n3fr2 b13fr h8u93r23ft41im03r2 8🐒🐒🐒🐒🐒🐒

How do you order that part and where can you get it?

Omgggg I’m going to do this right now because that is what mine keeps doing !!

Going to try this you are Doing the lords work 😅

Muchas gracias, me ayudó mucho el video, pude reparar mi mecedora. En mi caso la banda estaba bien pero gracias a que muestran como desmontarlo pude encontrar la falla del mio, solo se había salido de lugar una corredera, es decir que ya no caminaba por el riel, solo lo puse en su lugar y quedó a la perfección. Muchas gracias por el video. Saludos desde México

My O ring was fine. The issue mine was having was it was giving obstruction code as well. I took it apart like the video showed and cleaned out the gears near the motor and the track the device runs along. Hair and debris was twisting around the gears causing it to seize up. Great video

oh thank you so much for this!!!!

O ring size: I used a 1 3/4 O.D. x1 9.16in I.D ring(#38) and it was a perfect fit

It seems like this product is super weak. We all have the same issue. I really appreciate your video and tips, your time to teach all of us how to fix it. Thanks again

Thank you for the video. Mines does the same thing, i tried returning it but the 30/60 days return policy had expired.

Yes I’m having the same pronlem

Anyone have the issue where that it doesn't turn on at all? No error code - nothing? Thanks

Good video. You need an electric screwdriver. Haha. Check out the Skil on Amazon

My wife an Neo Nadel intensive care nurse brought a momaroo home for me to fix, Lucky me and thanks to your vid your charming wife showed me how to snap the cover off the, Something I wouldn't have tried unless I saw it done. The unit would run for one cycle then STOP but the belt was fine so being an electricain I figured that the motor software was sensing too much resistance. I took some light oil and oiled EVERY moving part, pivot point, and shafts and when I pressed start it worked as good as new. Seems the company was very stingy with the grease and what was applied at the factory was dry and dusty. I hope this might help someone out and thanks for making this vid. BTW the blurred pic on the wall behind you looks EXACTLY like my son no lie.

Excellent video thanks you for help me!! 🙏🏻🙏🏻🤩🤩

my mamaroo was working fine and suddenly stopped working, it won´t turn on. Do you have any idea why this happend?

I did this but my band wasn’t torn, I cleaned the sensor but it’s still not working!

How did you take the base off though? It just shows how you took off the middle part but I can’t take off the piece around it (base with buttons) off, the screws did nothing since I can’t take off the base 😭 I’m going to break it on accident I feel ):

Stupid. Pay all of this money and they use the cheapest parts possible and then you have to fix their company’s problems. It’s absurd how expensive it is and how quickly it fails. No wonder they’re on 67% off sale. They’re garbage.

OK FAT MAN K

But how did you remove the two other screws on the base? Idk what kind of screw to use to take it out.

I can’t get white top off

I bought a used mamaroo and I noticed that led screen is so dim is there a way to fix it?

My won't come on I need help

She is amazing 😱😱

How did you get the top off i can’t seem to get it off